Houston Outdoor Fireplaces

Thousands of satisfied customers
Local and family owned
+15 years in business
Licensed and insured
Always FREE Quotes

Code-Compliant Outdoor Fireplace in Chambers County, TX

At Houston Outdoor Fireplaces, we design and build safe, beautiful fire features that stand up to Southeast Texas weather. With 15+ years of experience, NFI-certified specialists, and full insurance, we deliver expert craftsmanship and dependable timelines. From Mont Belvieu to Anahuac, we handle permits, gas lines, and finish work in-house.

Whether you need a gas unit for burn-ban flexibility or a masonry showpiece in natural stone, we make it simple. Our team follows NFPA 211 and IRC R1001 for proper clearances and chimney performance, so you get warmth without smoke drift. Ready to start? Outdoor Fireplace Chambers County TX projects begin with a free on-site consultation. Call us today for an estimate.

Outdoor Fireplace Design, Build, and Installation Services

We specialize in custom masonry builds and gas installations tailored to the coastal conditions of Chambers County. Every project is engineered for safety, draft, and durability using proven materials and best practices.

Custom Outdoor Fireplace Construction

Want a true focal point that holds up to wind and humidity? We build free-standing and built-in masonry fireplaces with CMU block cores, firebrick fireboxes, and refractory mortar. Our crews use laser levels, plate compactors, and epoxy-coated rebar for proper footing and reinforcement. Choose limestone, sandstone, or manufactured stone veneer with marine-grade sealers to resist salt air near Trinity Bay. Expect clean draft, a UL-listed chimney cap with spark arrestor, and a hearth sized to code. Learn more about our Custom Outdoor Fireplace Construction services.

Outdoor Gas Fireplace Installation

Enjoy instant ambiance with the flip of a switch. We coordinate a Texas State Board of Plumbing Examiners licensed plumber for gas line sizing, CSST routing, and a 10 psi/15-minute pressure test with a calibrated manometer. Choose natural gas or propane, plus lava rock or fire glass media. Our NFI Certified Gas Specialists set clearances, venting, and shutoff placement per manufacturer specs and NFPA 211. It’s a burn-ban-friendly solution with reliable ignition and wind-rated enclosures. Learn more about our Outdoor Gas Fireplace Installation services.

Outdoor Fireplace Installation

Have a prefab or modular unit in mind? We install top brands to spec, including footing prep, anchoring, chase framing, and corrosion‑resistant fasteners. Our team verifies draft path, chimney height (10‑3‑2 rule guidance), and noncombustible wall finishes. We also integrate TV niches above the fireplace using proper heat deflection and clearances. From Beach City to Winnie, we deliver clean builds, fast timelines, and code‑ready inspections. Learn more about our Outdoor Fireplace Installation services.

Outdoor Kitchen & Fireplace Combination Construction

Create a complete outdoor living hub with a fireplace, grill island, and seating walls that match. We build concrete and paver patios, handle drainage grades, and set ICPI-compliant bases for long-term stability. Add lighting, outlets (TDLR-licensed electrician), and pergolas or patio covers for shade. We coordinate permits in Mont Belvieu and unincorporated areas, so you have one point of contact from design to final walkthrough. Learn more about our Outdoor Kitchen & Fireplace Combination Construction services.

Fire Pit Installation

Looking for a lower-profile gathering space? We build gas and wood-burning fire pits with proper wind screens, edge restraints, and paver bases. Gas options include ignition systems with weatherproof controls and shutoffs placed to code. Wood-burning bowls and masonry pits receive spark screens and ember guards for safety. We also offer seating walls and benches that tie the space together. Learn more about our Fire Pit Installation services.

Other Services We Offer

Why Homeowners Choose Us for Outdoor Fireplaces in Chambers County, TX

Houston Outdoor Fireplaces is known for safe, beautiful projects that meet code and stand up to coastal weather. Our NFI-certified team manages everything - design, permits, gas, electrical, and final inspections - so your project moves smoothly. We’ve completed hundreds of builds across the Bay Area Houston region, including Mont Belvieu and Beach City. When you need reliability for an Outdoor Fireplace Chambers County TX project, we’re the trusted local choice.

Certified Fireplace Expertise You Can Verify

Our team includes National Fireplace Institute Certified Gas and Wood Specialists and an NFI Hearth Design Specialist. We apply NFPA 211 and IRC R1001/R1004 to every build, from firebox geometry to chimney height and spark arrestor selection. That means cleaner draft, fewer smoke issues, and safer clearances to combustibles - especially important under patio covers or near siding.

We’re active with HPBA and the Concrete Masonry & Hardscapes Association. For paver work, we follow CMHA/ICPI standards, including base compaction and edge restraints around fire features. The result is a fireplace that looks right, performs correctly, and lasts.

Licensed Gas, Electrical, and Permitting Done Right

Gas lines are handled by a Texas State Board of Plumbing Examiners licensed plumber. We size lines for BTU demand, install CSST or black iron, and perform a 10 psi/15‑minute pressure test with a calibrated manometer. For lighting, fans, and TV power, a TDLR-licensed electrician handles weather-rated circuits and GFCI requirements.

We navigate permits in Mont Belvieu, Baytown (Chambers County side), and unincorporated areas following IFC 2021 where applicable. Need RRC AFS registration for propane work? We’ve got it covered. You get one point of contact and zero guesswork at inspections.

Engineered for Coastal Texas Wind and Salt Air

Bayside lots face wind and corrosion. We specify stainless steel hardware, marine-grade sealers, and corrosion-resistant components to protect against salt-laden air near Trinity Bay and Lake Anahuac. Tall chimney masses receive wind-load bracing and proper anchoring, reducing sway and cracking over time.

We also design low‑smoke fireboxes and use venting strategies that minimize smoke drift in prevailing bay winds. Example: In 2024, we completed a Mont Belvieu limestone build with a raised firebox, tuned throat, and UL-listed cap - solving smoke-back issues on breezy evenings.

Safety-First Tools, Materials, and Process

From mortar mixers and diamond-blade wet saws to laser levels and core drills, we use trade‑grade tools for precise cuts and plumb lines. Fireboxes are built with firebrick and refractory mortar; hearth extensions and wall shields are noncombustible. Chimney caps include spark arrestors (typically 3/8" mesh) to reduce ember escape.

Before handoff, we perform start‑up verification, gas leak detection, and CO safety checks where applicable. You’ll receive owner guidance on maintenance, burn‑ban alternatives, and cleaning schedules suitable for humid coastal climates.

Clear Communication, Warranties, and Clean Worksites

You’ll get a written scope, schedule, and transparent pricing. Our crews protect landscaping, keep sites tidy, and respect your neighbors. Most masonry builds run 2–3 weeks; prefab installs often finish in 2–5 days depending on inspections and weather.

We back workmanship with a written warranty and offer maintenance plans, including seasonal sealing for stone and stucco. That’s long-term peace of mind and a better return on your outdoor investment.

Outdoor Fireplaces Across Chambers County and Greater Houston

Houston Outdoor Fireplaces proudly serves residential and commercial clients across the Greater Houston area, with a strong focus on Chambers County communities. If you’re within about 30 miles of Houston or along I‑10 East, we’ve likely worked in your neighborhood. Count on fast response times and crews familiar with local inspectors.

Serving All Neighborhoods in Chambers County

We build and install in Mont Belvieu (77580), Baytown’s Chambers County side (77523), Beach City (77523), Cove (77523), Old River‑Winfree (77523/77535), Anahuac (77514), Hankamer (77560), Wallisville (77597), Winnie (77665), and Stowell (77661). Our team knows the coastal climate near Trinity Bay and Lake Anahuac, and we account for wind, corrosion, and drainage on every project.

From FM 3180 and SH 61 to SH 146 and I‑10 East, we design fireplaces that meet local guidelines and work with prevailing winds. If you’re exploring an outdoor fireplace in Chambers County, we’ll help align design, code, and budget.

Other locations we serve near Chambers County

Frequently Asked Questions

Do I need a permit for an outdoor fireplace in Chambers County or my city?

Most projects require permits if gas lines, structure height, or covered patio attachments are involved. In Mont Belvieu and Baytown (Chambers side), the city handles permits. In unincorporated areas, county or fire marshal guidance may apply, with IFC 2021 and NFPA 211 referenced. We confirm jurisdiction, prepare drawings, and coordinate inspections, including gas pressure tests. Homeowners appreciate that we handle paperwork end‑to‑end.

What’s the difference between a gas and wood‑burning outdoor fireplace?

Gas offers push‑button convenience, steady heat, and use during burn bans when allowed. It needs a licensed plumber, proper line sizing, and a pressure test. Wood units deliver crackle and higher radiant heat, but require more clearance and a well‑designed chimney for draft. In Chambers County’s windy bayside areas, we often recommend gas or a low‑smoke masonry design with a tuned throat and UL‑listed cap.

How close can an outdoor fireplace be to my house or patio cover?

Clearances depend on the unit and materials. We follow NFPA 211 and IRC R1001/1004, plus the manufacturer’s listing. Many wood‑burning units need several feet from combustibles and a hearth extension (often 16–20 inches in front). Under a cover, we use noncombustible finishes, heat shields, and proper chimney height to prevent smoke accumulation. We’ll verify exact distances with your plan reviewer.

What materials are best for outdoor fireplaces in coastal Southeast Texas?

We favor CMU cores with firebrick liners, natural stone or quality stone veneer, stainless steel hardware, and marine‑grade sealers. Near Trinity Bay, corrosion resistance is vital - epoxy‑coated rebar, sealed stucco, and properly flashed caps extend service life. For gas media, lava rock or fire glass performs well. We’ll match materials to your style and exposure to wind and salt air.

How much does a custom outdoor fireplace cost near Baytown/Mont Belvieu?

Typical ranges: quality gas units often start around the mid‑$6,000s installed; custom masonry builds commonly run $9,500–$20,000+ depending on size, stone, and chimney height. Add‑ons like seating walls, TV niches, or an outdoor kitchen can expand scope. We provide a detailed line‑item proposal after a site visit, so you can phase the project if needed.

Can you build an outdoor fireplace under a covered patio?

Yes - done right. We use noncombustible surrounds, verify clearances to framing, and size the chimney for draft. For gas, we follow manufacturer venting and termination rules. We also engineer for wind loads and specify heat deflection when adding a TV niche. Our team coordinates permits and inspections to ensure a safe, code‑compliant installation.

Who runs the gas line for an outdoor fireplace in Texas?

A Texas State Board of Plumbing Examiners licensed plumber must install and test gas lines. We coordinate sizing, routing, shutoff placement, and a 10 psi/15‑minute pressure test using a calibrated manometer. For propane, RRC AFS requirements apply. Our NFI Certified team then sets the appliance, media, and ignition to manufacturer specs.

Will a county burn ban affect using my outdoor fireplace?

During burn bans, wood‑burning is often restricted under TCEQ and local rules. Gas fireplaces with approved burners typically remain permissible since there’s no open flame producing embers. We’ll advise on current Chambers County guidance and can design burn‑ban‑friendly gas features so you can still enjoy your space safely.

What are the permit steps for a gas‑fueled outdoor fireplace in Mont Belvieu vs unincorporated Chambers County?

In Mont Belvieu, submit a site plan, appliance specs, and gas line diagram; inspections cover trenching and pressure testing. In unincorporated areas, the county or fire authority may review for NFPA 211/IFC 2021 compliance. We prepare drawings, coordinate the licensed plumber, and meet the inspector so your Outdoor Fireplace Chambers County TX project passes the first time.

Which corrosion‑resistant materials should I choose within a few miles of Trinity Bay?

Use stainless fasteners, galvanized or epoxy‑coated reinforcement, sealed stone or stucco, and a powder‑coated or stainless chimney cap. Specify non‑ferrous gas components and protect TV niches with heat deflection and venting. We also apply marine‑grade sealers and schedule resealing every 24 months to combat salt, humidity, and UV exposure common along the bay.